SALE
RØDE NTG 1 DIRECTIONAL CONDENSER MICROPHONE
RØDE NTG 1 DIRECTIONAL CONDENSER MICROPHONE
RØDE NTG 1 DIRECTIONAL CONDENSER MICROPHONE
  1. RØDE NTG 1 DIRECTIONAL CONDENSER MICROPHONE
  2. RØDE NTG 1 DIRECTIONAL CONDENSER MICROPHONE
  3. RØDE NTG 1 DIRECTIONAL CONDENSER MICROPHONE

RØDE NTG 1 DIRECTIONAL CONDENSER MICROPHONE

Original price was: 1,485.00kr..Current price is: 371.25kr..

Varenummer (SKU): DA-6587873525935 Kategori:

RØDE NTG 1 DIRECTIONAL CONDENSER MICROPHONE

  • For Indie Films, TV & Documentaries
  • Phantom Powered
  • Selectable 80 Hz Low-Cut Filter
  • Low Handling Noise
  • High Maximum SPL before Distortion
  • Slight Presence Boost
  • Windscreen Reduces Wind Noise
  • Lightweight Metal Housing

###split###

Capture quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the Rode NTG1 shotgun microphone.

With low handling noise and the ability to endure loud sound sources before distortion, the NTG1 offers a cost-effective solution for recording clean dialogue and sound effects.

The NTG1’s elevated sensitivity allows it to produce strong output levels without having to apply extreme gain at your mic preamp.

Sonically, the NTG1 delivers consistently clear sound due in part to its gentle rise in high frequencies and its rumble-reducing selectable low-cut filter.

The durable and lightweight high-grade aluminum housing is finished in hard-wearing epoxy paint to withstand the stress of location recording.

Quality Sound Capture

The combination of the NTG1’s 8.6″ long body and supercardioid polar pattern yields focused front-facing directionality and enhanced attenuation of sound entering from the sides.
Its low self-noise of 18 dBA and sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones.
Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones.


Phantom Powered

Thanks to its 3-pin XLR output and compliance with 24V or 48V phantom power, the NTG1 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters, as well as built-in preamps on many camcorders and cinema cameras.


Ideal for Boompole Mounting

The NTG1 includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG1 in the Rode SM4-R shockmount or Rode PG2-R pistol grip (both available separately) to impede the transfer of vibrations in boompole or handheld applications.


Windscreen Minimizes Wind Noise

The NTG1 has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners.
For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the Rode Blimp furry windshield and shockmount suspension system (available separately).


###split###

Microphone
Form Factor Stand/Boom Mount
Sound Field Mono
Operating Principle Line Gradient
Capsule Condenser
Diaphragm 0.5″ / 12.70 mm
Polar Pattern Supercardioid
Orientation End Address
Circuitry Solid-State (JFET)
Pad None
High-Pass Filter 80 Hz, 12 dB/Octave
Tone Adjustment None
Indicators None
On-Board Controls High-Pass Filter
Windscreen Foam (Included)

Performance
Frequency Range 20 Hz to 20 kHz
Maximum SPL 139 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
Off-Axis Rejection 14 dB at 60°
16 dB at 120°
12 dB at 180°
Impedance 50 Ohms
Sensitivity -36 dBV/Pa at 1 kHz
Output Level 6.9 mV (Max)
Dynamic Range 121 dB
Signal-to-Noise Ratio 76 dB A-Weighted (1 kHz)
Equivalent Noise Level 18 dB A-Weighted

Connectivity
Output Connectors (Analog) 1 x XLR 3-Pin

Power
Operating Voltage 24 to 48 V

Physical
Color Black
Mounting 3/8″-16 Female, 5/8″-27 Female, Mic Clip (with Included Hardware)
Construction Material Aluminum
Dimensions ø: 0.87 x L: 8.62″ / ø: 22 x L: 219 mm
Weight 3.7 oz / 105 g (Microphone)

Relaterede varer